McIntosh Racing
Login myCart
March 19 2024 [New Zealand] 
Home   Blog   Company   Catalogue   Gallery   Forum   Tech docs   Members   Contact  

Catalogue

Models -> Pre-war back to Models

Petrol & Oil Tanks

101-064 Petrol Tank - 1948-1949 Gardengate. Painted. Steel, all welded "bolt-through" type. Without fuel cap. $2,190.00
add to cart
101-066 Petrol Tank - 1937-1949 Gardengate or Rigid Frame. Steel, welded and soldered with "pie-crust" edging. Without fuel cap. $1,950.00
add to cart
101-067 Petrol Tank - 1937-1949 Gardengate or Rigid Frame. Painted. Steel, welded and soldered with "pie-crust" edging. Without fuel cap. $2,350.00
add to cart
101-068 Petrol Tank - 1927-1929 CS 1. Steel, welded and soldered with "pie-crust" edging. Without fuel cap. $1,770.00
add to cart
101-073 Pie Crust Edging 7/8" wide. Tank reinforcing used on all soldered tanks. $32.00
add to cart
101-074 Pie Crust Edging 1 1/4"wide. Tank reinforcing used on all soldered tanks. $32.00
add to cart
101-325 Wing nut Cap 3" 1934-1950 Chrome, as used on International petrol tanks. $166.00
add to cart
101-326 Wing nut Cap 3" 1934-1950. Chrome, as used on Manx petrol tanks. With breather pipe. $234.00
add to cart
101-327 Wing nut cap 2-1/2" 1934-1956.Chrome, as used on International oil tanks. $62.00
add to cart
101-328 Wing nut cap 2-1/2" 1934-1950. Chrome, as used on Manx oil tanks. With breather pipe. $126.00
add to cart
101-330 Fibre Washer for 1/4 BSP petrol taps, drain plugs or oil fittings. $0.50
add to cart
101-331 Fibre Washer for 1/4 BSP petrol taps, drain plugs or oil fittings. Half thickness for aligning tap position $0.50
add to cart
101-435 Chin Pad 1935-1950. Black sponge pad for Pre-war and Gardengate petrol tanks. 1" thick sponge. $37.00
add to cart
101-436 Chin Pad Clips. 1935-1950, for Pre-war and Gardengate petrol tanks. Satin chrome. $38.00
add to cart
101-503 Filter mesh only for soldering into #100-501 $22.00
add to cart
101-580 Plug 1/8 BSP, to block off chain oiler fittings. $3.00
add to cart
101-640 Union Nut, 3/8" Rotherham. For main oil hose fitting. Satin chrome $5.00
add to cart
101-650 Union Nut, 1/4" Rotherham. For fuel pipe, breather fitting, etc.. Satin chrome $4.00
add to cart
101-730 Breather Pipe Fitting. Nut and pipe to suit standard Manx fittings. Satin chrome. $13.00
add to cart
101-740 Breather Fitting. 1/4" Push-on hose type. Replaces standard Manx fittings in crank case and allows direct fitting of rubber breather hose. $5.00
add to cart
101-741 Breather Fitting. 5/16" Push-on hose type. Replaces standard Manx fittings in crank case and allows direct fitting of rubber breather hose. $5.00
add to cart
101-742 Breather Fitting. 3/8". Push-on hose type. Replaces standard Manx fittings in crank case and allows direct fitting of rubber breather hose. $5.00
add to cart
101-750 Cam Box Feed Pipe. Satin chrome fittings with rubber hose. To original specifications. State model. $36.00
add to cart
101-760 Float bowl Feed Pipe. Satin chrome fitting. State type of float bowl used. $27.00
add to cart
101-762 90 degree union & nut, to suit 5/16" hose. $12.00
add to cart
101-763 Straight Rotherham swivel union, for 1/4" hose, satin chrome $8.00
add to cart
101-764 Straight Rotherham swivel union, for 5/16" hose, satin chrome $8.00
add to cart
101-765 Straight Rotherham swivel union, for 3/8" hose, satin chrome $8.00
add to cart
101-780 Fuel Hose. 1/4" Reinforced, low pressure. $7.50
add to cart
101-781 Fuel Hose. 5/16" Reinforced, low pressure. $8.00
add to cart
101-782 Fuel Hose. 3/8 " Reinforced, low pressure. $9.00
add to cart
101-783 Fuel Hose. 1/2 " Reinforced, low pressure. $11.00
add to cart
101-785 Nitrile Hose. 1/8" for breather hose $4.00
add to cart
101-786 Nitrile Hose. 3/16" for breather hose $4.50
add to cart
101-787 Nitrile Hose. 1/4" for breather hose $5.50
add to cart
101-788 Nitrile Hose. 5/16" for breather hose $7.50
add to cart
101-789 Nitrile Hose. 3/8" for breather hose $8.50
add to cart
101-791 Oil Hose. 1/4" Reinforced, high pressure. $10.50
add to cart
101-792 Oil Hose. 5/16" Reinforced, high pressure. $12.50
add to cart
101-793 Oil Hose. 3/8" Reinforced, high pressure. $15.50
add to cart
101-794 Oil Hose. 1/2" Reinforced, high pressure. $17.00
add to cart
101-800 Transfer, black for 'Norton' petrol tank. Water type. Correct type for all Manx and road models.1930-63 $5.00
add to cart
101-850 Transfer, gold 'Norton', 70mm For rear mudguard. Stick-on type. $7.00
add to cart
101-860 Transfer, gold, Norton. 40mm water slide type $8.00
add to cart

Handlebars & Levers

102-052 Handlebars 1935-1939. Correct Girder Fork Manx bend. 7/8" diameter. With wrap-around mounting bracket for rubber mounted handlebars.. Chrome. $155.00
add to cart
102-053 $105.00
add to cart
102-054 Handlebars Rubber Mounts 1935-1939. For all Girder Fork Norton’s with rubber mounted handlebars. State if 7/8" or 1" diameter handlebars.
$48.00
add to cart
102-055 Handlebars 1925-1934. T.T. type. 1" diameter. To suit Webb and early Norton forks without rubber mounted handlebars. Unplated. Not drilled for reverse levers. $78.00
add to cart
102-060 Brake Lever Assembly. 1935-1954 - Special Manx type with extra long lever and heavy duty clamp. Complete assembly, for 7/8" handlebar. $240.00
add to cart
102-070 Clutch Lever Assembly. 1935-1954 - Special Manx type with extra long lever and heavy duty clamp. Complete assembly, for 7/8" handlebar. $240.00
add to cart
102-080 Handlebar End Plugs. Black plastic. $1.00
add to cart
102-103 Lever Blade, early type. Brake side 1935-1954. Special extra long type. Chrome finish. $94.00
add to cart
102-104 Lever Blade, early type. Clutch side 1935-1954. Short type. Chrome finish. $94.00
add to cart
102-105 Lever Blade, early type, with ball. Brake side 1935-1954. Special extra long type. Chrome finish. $116.00
add to cart
102-106 Lever Blade, early type, with ball. Clutch side 1935-1954. Special short type, with ball end, to meet racing regulations. Chrome finish. $116.00
add to cart
102-140 Lever Pivot 1936-1963 steel pivot bolt, nut and lock nut. Satin chrome - original specification. $22.00
add to cart
102-150 Cable Pivot 1936-1963 Trunnion for mounting inner cable to lever. Original specification. Satin chrome. $19.00
add to cart
102-285 Brake Cable Adjuster. Knurled, long type. 5/16" x 26, To suit early front brake. $0.00
add to cart

Twist Grips

102-200 Handlebar Grips. Small diameter rubber grips to original Amal pattern. Open ends for plugged handlebars. Correct length for Amal throttle. $21.00
add to cart
102-201 Handlebar Grips. Small diameter rubber grips to original Amal pattern. Closed ends. Correct length for Amal throttle. $18.00
add to cart
102-202 Handlebar Grips. Plain style, open end $16.00
add to cart
102-210 Handlebar Grips. Tommaselli. Closed end, to suit British type twist grip. $19.00
add to cart
102-211 Handlebar Grips. Tommaselli. Open-end, to suit British type twist grip. $22.00
add to cart
102-230 Twist Grip Throttle Assembly 1937-1953. Amal pattern. Complete with friction adjuster. $36.00
add to cart
102-232 Throttle housing screws, Amal, all years. $6.00
add to cart
102-234 Throttle friction screw & nut. Amal, all years. $4.00
add to cart
102-260 Magneto Cable Adjuster. Hex head 1/4 x 26 tpi. Short type for magneto. $3.00
add to cart
102-273 Cable Adjuster Rubber Cover for small cable adjusters. $3.00
add to cart
102-280 Cable Adjuster. Large knurled head. 5/16" x 26 tpi. To suit early Norton type gearboxes and SLS front brake cable. $12.00
add to cart

Featherbed Footrests & Fittings

102-380 Footrest Kitset - 1932-1950 Gardengate & pre-war. Includes serrated lug, bent tube and 2x end plates for holding footrest rubber. Left or right. $194.00
add to cart
102-383 Footrest Screw & nut 1932-1950 for footrest rubber. Gardengate & pre-war. Domed head, satin chrome. $18.00
add to cart
102-385 Footrest mounting Bolt for Gardengate Manx and pre-war. 7/16"x 20 tpi, satin chrome $11.00
add to cart
102-420 Brake Pedal - 1932-1939. Chrome.. For rigid frame models with rear mounted footrests. Pivots on special footrest bolt. $212.00
add to cart
102-422 Brake Pedal Pivot, 1932-39, for rigid frame Manx. Replaces footrest bolt. Satin chrome. $0.00
add to cart
102-422 Brake Pedal Pivot, 1939-50, for Garden-gate frame Manx. Satin chrome. $0.00
add to cart
102-443 Brake Rod and Clevis. All rigid frame models. Satin chrome. $48.00
add to cart
102-447 Brake Pedal Return Spring, CS1 & ES2 1927-30 $26.00
add to cart
102-456 Brake rod wing-nut. Gardengate & pre-war. $0.00
add to cart
102-651 Bolt, Gearbox Lever 1934-56. Black finish or satin chrome $8.00
add to cart
102-670 Gear Pedal Rubber. Short type 1945-1973 $7.00
add to cart
102-673 Gear Pedal Rubber, for Sturmey-Archer foot change gearbox, 1930-1934. $24.00
add to cart
102-700 Clevis Pin 1/4" diameter $5.00
add to cart

Cables

108-460 Clevis for front brake cable. Made from thick steel to reduce flex. $11.00
add to cart
102-700 Clevis Pin 1/4" diameter $5.00
add to cart
102-855 Clutch Cable Kitset- Norton "dolls-head" Gearbox. Nylon lined cable. $59.00
add to cart
102-920 Outer cable 5 mm nylon lined $7.00
add to cart
102-921 Inner cable 1.5mm for 5mm outer. $2.50
add to cart
102-922 Inner cable 1.5mm braided wire, for 5mm nylon lined throttle cable $4.00
add to cart
102-925 Outer cable 6 mm nylon lined. $9.00
add to cart
102-926 Inner cable 2 mm for 6mm outer. $3.00
add to cart
102-931 Outer cable 7 mm nylon lined. $12.00
add to cart
102-932 Inner cable 2.5mm for 7mm outer. $4.00
add to cart
102-934 Inner cable 1.2mm. $2.50
add to cart
102-935 Inner cable 1mm. $2.50
add to cart

Front Mudguard

103-254 Front Mudguard Stand Stud - 1928-1950. Double ended stud which mounts the fold-down front stand to mudguard. Satin chrome. $16.00
add to cart

Chainguard

103-465 Front Chainguard 1936-1950 Pre-war & Gardengate. To suit all magnesium crankcase models. $218.00
add to cart
103-470 CS1 Upper Chaincase Casting. 1927-30 Unmachined casting. $187.00
add to cart
103-471 CS1 Upper Chaincase Casting, with dynamo drive chain. 1927-30 Unmachined casting. $218.00
add to cart
103-475 CS1 Clutch Cover, alloy. 1927-30 $54.00
add to cart

Number Plates

103-500 Side Number Plates. All models. Alloy, with pressed rib on edge. Unpainted. $39.00
add to cart
103-510 Side Number Plate Fastening Kit. Standard type, with 8 x bolts, nuts and washers. $36.00
add to cart
103-515 Side Number Plate Fastening Kit. Special type, with 8 x bolts, nuts, rubber packers and washers. This allows the number plates to be removed more easily for bike cleaning. $52.00
add to cart

Exhaust System

103-800 Exhaust Nut. Finned type to suit all Manx models. Satin finish. $89.00
add to cart
103-820 Exhaust Nut with oversize thread - to order only. $110.00
add to cart
113-760 Exhaust Thread Repair all models. Uses bronze thread insert. $170.00
add to cart

Special Tools

111-080 Exhaust Spanner, to suit finned exhaust ring. All model Manxes and Internationals. Avoids damage to fins. $59.00
add to cart

Sprockets

104-250 Engine Sprocket - Taper Type 1931-1953 to suit all Long-stroke Manx and Internationals. 18-24 tooth. $184.00
add to cart
104-316 Gearbox Sprocket 19 Tooth - Dolls-head Type. Standard Manx size $92.00
add to cart
104-350 Gearbox Sprocket Nut. Large nut to suit Norton and AMC type gearbox. $28.00
add to cart
110-100 Lock tab to suit gearbox sprocket. $9.00
add to cart
110-110 Screw to suit engine and gearbox lock tabs. $1.50
add to cart
104-540 CS1 Rear Sprocket, 45 Tooth 1925-1931. To suit Enfield rear hub with cush-drive. $368.00
add to cart
104-541 CS1 Rear Sprocket, 50 Tooth 1925-1931. To suit Enfield rear hub with cush-drive. Also suits Model 18, etc $368.00
add to cart
104-545 CS1 Rear Cush-drive Rubbers, 1925-1931. To suit Enfield rear hub. Set of 6 $108.00
add to cart
113-682 Magneto sprocket, top. Inter & Gardengate Manx $68.00
add to cart
113-683 Magneto sprocket, lower. Inter & Gardengate Manx $68.00
add to cart
113-684 Magneto sprocket, top. CS1 1927-30 $132.00
add to cart
113-685 Magneto sprocket, lower. CS1 1927-30 $107.00
add to cart

Chains

104-550 Primary Chain. Racing grade Regina chain with rivet joining link. $66.00
add to cart
104-560 'O' Ring primary chain 78 pins - highly recommended! No need for chain oiler. $90.00
add to cart
104-561 'O' Ring primary chain 80 pins - highly recommended! No need for chain oiler. $92.00
add to cart
104-600 Rear Chain. 96 pins. Racing grade Regina chain with clip joining link. $96.00
add to cart
104-601 Rear Chain. 98 pins. Racing grade Regina chain with clip joining link. $98.00
add to cart
104-602 Rear Chain. 100 pins. Racing grade Regina chain with clip joining link. $100.00
add to cart
104-603 Rear Chain. 102 pins. Racing grade Regina chain with clip joining link. $102.00
add to cart
104-610 Rear Chain. Standard. 102 pins. Standard (narrow) grade Regina chain with clip joining link. Similar dimensions to original Renolds 5/8"x 1/4", where space is a problem. $52.00
add to cart
104-660 Magneto Chain 46 pins. 1932-1950 complete with rivet link. To suit all Featherbed Manx models. $47.00
add to cart

Forks

105-264 Bearing-Steering Head. All Pre-war models with girder forks. $180.00
add to cart
105-265 Balls, 5/16" For head bearings of all Pre-war & Gardengate models. $13.00
add to cart
105-833 Rear Axle Nut, Garden-gate Manx 1939-1949 and post-war road models, open end $14.00
add to cart
105-835 Axle Nut, closed end. All pre-war road and Manx models. Satin chrome. $28.00
add to cart
105-840 Pin, Girder Fork Rebound Spring. To suit all1933-1946 Norton girder forks. $42.00
add to cart

Steering Damper

105-772 Andre Damper Knob. 1932-1950. All Gardengate & Pre-war models. $78.00
add to cart

Frame Mountings

106-385 Washer, 1/2" x 1" bevel edge, satin chrome $5.00
add to cart
106-555 Bolt, for bottom of plunger unit. 7/16" x 20 tpi.with large head. Satin chrome $8.00
add to cart
106-556 $0.00
add to cart

Stands

106-580 Centre Stand. Rigid frame International $218.00
add to cart
106-583 Stand Pivot Bolt and Nut. All rigid frame models. Satin Chrome. $26.00
add to cart
106-585 Centre Stand. Gardengate Manx and International. $232.00
add to cart
106-588 Centre Stand Pivot Bolts and Nuts, Gardengate Manx models. Set of 2, with nuts, Satin chrome. $24.00
add to cart
106-590 Rear Stand Kitset, CS1 and Flat-tank $180.00
add to cart
106-594 Rear Stand Pivot Bolts and Nuts, 1923-1947 rigid frame models. Set of 2, with nuts.Satin chrome. $22.00
add to cart
106-596 Rear Stand Spring, 1923-1930. Flat-tank and CS1 $39.00
add to cart
106-598 Rear Stand Spring, 1931-1947. All rigid frames $36.00
add to cart
106-599 Centre Stand Spring, 1931-1952. All Gardengate and Rigid frame models. $31.00
add to cart

Workshop Stands

106-700 Norton Bench End Castings. Alloy. Copied from the original 1920’s Norton show stands, with the Norton logo cast in. The ultimate accessory for the true Norton enthusiast. Ideal for fitting with a thick timber top. $447.00
add to cart

Tachometer & Parts

107-020 Tacho 1946-54 Smiths Chronometric 8000rpm to suit Long-stroke Manx and early Short-stroke. Rebuilt to new condition. Available in 2:1 or 4:1 ratio, clockwise or anti-clockwise cable rotation. State year for correct face type. $0.00
add to cart
107-092 Tacho Cable, 1935-1939 with girder forks. $59.00
add to cart
107-110 Tacho Drive Gearbox, reproduction. Ball bearing or brass type. To suit all models of Manx or International to fit on timing cover. State if 1:1 or 2:1. Reversing or non-reversing. $278.00
add to cart
107-130 Spade fitting for gearbox end of cable. $11.00
add to cart
107-300 Speedo Bracket. 1934-39, for girder fork models. $26.00
add to cart

Wheels, Brakes & Tyres

108-006 Front Brake Assembly 1937-1939. Single sided, conical, 8" single leading shoe type. Hub cast in heat treated cast iron. Brake plate and shoes cast in heat treated aluminium. $2,738.00
add to cart
108-040 Bearing Lock Ring , alloy. Suits all models. $26.00
add to cart
108-041 Bearing Lock Ring , steel. Suits all gardengate & road models. $23.00
add to cart
108-072 $1,455.00
add to cart
108-075 $1,272.00
add to cart
108-090 Springs to suit all 8" brakes. $6.00
add to cart
108-100 Wheel Bearing sealed type. 2 piece set. All models. $19.00
add to cart
108-101 Wheel Bearing open type. 2 piece set. All models. $19.00
add to cart
108-200 Wheel Rim, undrilled. All sizes and widths available. 18",19"or 21", WM2 orWM3 $0.00
add to cart
108-210 Wheel Rim, Manx 19"xWM2 (1.85") Alloy flanged. Drilled to suit. (State hub type) $455.00
add to cart
108-220 Wheel Rim, Manx 18"xWM2 (1.85") Alloy flanged, Drilled to suit. (State hub type) $455.00
add to cart
108-230 Wheel Rim, Manx 19"xWM3 (2.15") Alloy, flanged. Drilled to suit. (State hub type) $455.00
add to cart
108-250 Wheel Rim, Manx 18"xWM3 (2.15") Alloy, flanged. Drilled to suit. (State hub type) $455.00
add to cart
108-255 Wheel Rim, Manx 21"xWM2 (1.85") Alloy flanged. Drilled to suit. (State hub type) $322.00
add to cart
108-253 $255.00
add to cart
108-270 Wheel Rim Drilling, to suit your hub. NB Manx front and rear rims have unique spoking pattern and require special offset drilling. $155.00
add to cart
108-300 Front Spoke Sets. Stainless-steel butted spokes with ’chrome on brass’ nipples. Rolled thread. Satin finish to give original appearance. State rim size and make. $338.00
add to cart
108-380 Grease Retaining Cup. Alloy cup. Rivets to the inside of brake plate. All models. $24.00
add to cart
102-700 Clevis Pin, 1/4"for brake rods. Satin chrome. $5.00
add to cart
102-700 Clevis Pin, 1/4" for brake cable clevis 108-460. Satin chrome. $5.00
add to cart
108-460 Clevis for front brake cable. Made from thick steel to reduce flex. $11.00
add to cart
108-470 Felt Seal to suit all 8" front hubs with lock ring. Also suits all road type Norton hubs from 1932. $3.00
add to cart
108-474 Brake Arm, 1932-1953. For all SLS front brakes. Painted black. $36.00
add to cart
108-700 Brake Lining. Racing grade 2520V 1.500" wide x .275" thick $242.00
add to cart
108-706 Brake Lining. Racing grade 2520V 1.625" wide x .250" thick x 7.500" long $96.00
add to cart
108-840 Spoke, blank. 8/10 gauge straight $4.50
add to cart
108-850 Spoke, blank. 9/10 gauge straight $4.50
add to cart
108-852 Spoke, blank. 9 gauge straight $3.50
add to cart
108-853 Spoke, blank. 10 gauge straight $3.50
add to cart
108-854 Spoke, blank 10 gauge 90 degree $3.50
add to cart
108-860 Nipple, brass. 10 gauge x .250" $1.50
add to cart
108-862 Nipple, brass. 10 gauge x .300" $1.50
add to cart
108-890 Tyre, Front, Avon 19" Speedmaster. Race compound 2.75/3.00 x 19" $312.00
add to cart
108-900 Tyre, Front, Avon 19" Speedmaster. Race compound 3.25 x 19" $314.00
add to cart
108-905 Tyre, Front, Avon 21" Speedmaster. Road compound 3.00 x 21" $155.00
add to cart
108-906 Tyre, Front, Avon 21" Speedmaster. Race compound 3.00 x 21" $332.00
add to cart
108-910 Tyre, Rear, Avon 19" GP. Race compound Rear3.50 x 19" $368.00
add to cart
108-928 Tyre, Rear, Avon 20" SM. Road compound Rear 3.50 x 20" $398.00
add to cart
108-940 Rim Tape. For 18" rims. $4.00
add to cart
108-941 Rim Tape. For 19" rims. $4.00
add to cart
108-942 Rim Tape. For 21" rims. $4.00
add to cart
108-953 Tube, Michelin. 3.00/3.25 x 19" $24.00
add to cart
108-954 Tube, Michelin. 3.25/3.50 x 19" $38.00
add to cart
108-958 Tube, Michelin. 2.75/3.00 x 21" $26.00
add to cart
108-200 Wheel Rims Undrilled. All sizes and widths available. 18",19"or 21",WM1, WM2 or WM3. Steel rims also available for early models. $0.00
add to cart
108-210 Wheel Rim, Manx 19"xWM2 (1.85") Alloy flanged. Drilled to suit. (State hub type) $385.00
add to cart
108-230 Wheel Rim, Manx 19"xWM3 (2.15") Alloy flanged. Drilled to suit. (State hub type) $385.00
add to cart
108-250 Wheel Rim Drilling, to suit your hub. N.B. Manx rear rims need a special drilling pattern so LH spokes go to RH dimples. $85.00
add to cart
109-400 Rear Spoke Set. Stainless steel spokes with ’chrome on brass’ nipples. Rolled threads. Satin finish to give original appearance. State rim size and make. $338.00
add to cart
109-551 Brake Cam, Rear. 1932-1963. $71.00
add to cart
105-833 Rear Axle Nut, Garden-gate Manx 1939-1949 and post-war road models, open end $0.00
add to cart
109-750 Brake drum, rear, CS1 & ES2 1928-1931 finned type $455.00
add to cart
109-760 Rear brake spring for Enfield 8" brake 1924-1931 $16.00
add to cart

Fittings For Motors & Special Nuts

110-030 Cambox Base Plate, CS1 1927-30. Steel plate between cambox and head nuts. Nickel plated. $88.00
add to cart
110-051 Engine Sprocket Nut 1932-1953. All Long-stroke models. $0.00
add to cart
110-100 Gearbox Sprocket Lock Tab. 1932-1963 All models. $9.00
add to cart
110-110 Screw to suit engine and gearbox lock tabs. $1.50
add to cart
104-350 Gearbox Sprocket Nut. 1932-1963 Large LH nut to suit Norton and AMC gearboxes. $19.00
add to cart
110-140 Bevel Housing Nuts. 5/16"x26 tpi with small hex. To suit cam drive housing. $16.00
add to cart
110-200 Clutch Nut to suit mainshaft of gearbox. All models. $7.00
add to cart
110-210 Clutch Nut Spring Washer to suit all models. $1.50
add to cart
110-320 Magneto Base Studs. 3/8" stud for Gardengate & International models. $24.00
add to cart
110-330 Magneto Base Stud - Oversize to repair damaged magneto body 7/16" x 20tpi. $11.00
add to cart
110-340 Magneto Base Stud -Oversize to repair damaged magneto body.1/2" x 20tpi. $11.00
add to cart
110-360 Magneto Base Nuts. 3/8" special small hex (.525"), long nuts. Satin chrome. $9.00
add to cart
110-371 Magneto Base Washers. Special thick washers, essential for keeping magneto tight on mounting. All models. $12.00
add to cart
114-350 Magneto Shaft Nut. 3/8" BSF. $2.00
add to cart
110-410 Bevel Housing Stud. 5/16" stud for crankcase or early model cambox. $5.00
add to cart
110-450 Blanking Screw. 1/4" for timing chest. $3.00
add to cart
110-460 Blanking Screw. 5/16" for timing chest. $3.00
add to cart
110-490 Oil Fitting for cambox feed and breather unions. 1/4x1/4 BSP. Satin chrome. Suits all Manx & International models. $9.00
add to cart
110-500 Oil Fitting. Large type for main feed and return pipes. 3/8x1/4 BSP. Screws into crankcase. Satin chrome. Suits all Manx & International models. $12.00
add to cart
110-510 $10.50
add to cart
110-530 Drain Plug. 1/4 BSP. Drilled for magnet & lock wire. Satin chrome. Suits all Single motors & Norton (pre-AMC) gearboxes. $12.00
add to cart
110-532 Drain Plug with magnet. 1/4 BSP. Drilled for magnet & lock wire. Satin chrome. Suits all Single motors & Norton (pre-AMC) gearboxes. $28.00
add to cart
110-540 Drain Plug. Larger 3/4" hex for better sealing. Drilled for magnet & lock wire. Satin chrome. $12.00
add to cart
110-542 Drain Plug with magnet. Larger 3/4" hex for better sealing. Drilled for magnet & lock wire. Satin chrome. $28.00
add to cart
110-545 Washer, copper, 1/4 BSP. For drain plug or oil fittings. $1.00
add to cart
110-546 Washer, copper, 3/8" diameter. For lower bevel chamber filter bolt. $0.50
add to cart
110-552 Screw, Drive-side Main bearing locking plate, 1/8" BSW Countersunk. $1.20
add to cart
113-953 Cambox Centre Bearing Lock Plate, 1932-63 $21.00
add to cart
110-650 Valve Spring Bottom Plates for all SOHC Manx & Internationals. Cast in bronze. $78.00
add to cart

Cover Screws

110-710 Screw Set - Gardengate Manx & International Motor. 1/4"Whitworth screws for timing cover, magneto chain cover & top bevel cover. 11 per set. Satin chrome. $33.00
add to cart

Special Tools & consumables

111-010 Valve Spring Tongs, made to original pattern. Hand forged. Essential for maintaining a Manx or International with hairpin valve springs. $276.00
add to cart
111-050 Clutch Spring Tool, to suit all Manx 1/4" square-hole spring screws.' Speed-brace' design for easy use. Essential at the race track. $33.00
add to cart
111-080 Exhaust Spanner, to suit finned exhaust ring. All model Manxes and Internationals. Avoids damage to fins. $59.00
add to cart
111-085 Float Level Gauge, to suit all TT, RN and GP carbs with .625" hex jet cap. Essential for accurate setting of float bowl height. $28.00
add to cart
111-300 Lock Wire Pliers. Small (6") type with self recoiling centre shaft. $46.00
add to cart
111-400 Lock Wire stainless steel aircraft specification. 1lb roll - .020". $57.00
add to cart
111-410 Lock Wire stainless steel aircraft specification. 1lb roll - .025". $57.00
add to cart
111-420 Lock Wire stainless steel aircraft specification. 1lb roll - .032". $57.00
add to cart
111-430 Timing Degree Disc, alloy. $46.00
add to cart
111-440 Gasket Sealer, 3 Bond - 1211. White silicon. Ideal for gaskets or where easy removel is required.  $0.00
add to cart
111-441 Gasket Sealer, 3 Bond - 1104 x 200gms. Grey gasket sealer for metal to metal joints. The best sealer by far for all Norton crankcases.  $0.00
add to cart
111-450 Castor Oil 50w 20 litres $0.00
add to cart
111-451 Castor Oil 50w 1 litre $14.00
add to cart
111-455 Mobil 4T , fully synthetic 15w-50. Racing motorcycle oil. 4 litre pack $72.00
add to cart
111-460 Sponge sheet 12mm $245.00
add to cart

Clutch Parts

112-010 Clutch Springs to suit AMC and Norton racing clutch. Set of 3. $21.00
add to cart
112-050 Clutch Spring Screws, satin chrome. Special spring retaining screws with square socket in head. To suit AMC and Norton clutches. Set of 3. $33.00
add to cart
112-051 Clutch Spring Screws, black. Special spring retaining screws with square socket in head. To suit AMC and Norton clutches. Set of 3. $33.00
add to cart
112-100 Clutch Spring Cups. Satin chrome. To suit AMC and Norton racing clutch. Set of 3. $33.00
add to cart
112-110 Clutch Spring Cups, black. To suit AMC and Norton racing clutch. Set of 3. $33.00
add to cart
112-120 Clutch Spring Cups to suit AMC and Norton racing clutch. Set of 3. Alloy. $36.00
add to cart
112-150 Clutch Spring Studs. Special studs which hold backing plate to drum to suit all racing clutches. Set of 3. Suit all Manx models with 3 plate clutch. $39.00
add to cart
112-160 Clutch Spring Studs - Long. Special studs for holding backing plate to drum. Set of 3. Long type to suit early road clutches. $42.00
add to cart
112-225 Push-rod. All models. Silver steel. $8.00
add to cart
112-255 Clutch mushroom For all pre-AMC clutches. $18.00
add to cart
112-360 Clutch Plate - Norton steel plate, with ears (8mm) on inside. All Norton clutches to 1956. $17.00
add to cart
112-370 Clutch Plate - Norton fibre plate, 5mm thick. With ears on outside. All Norton clutches to 1956 $26.00
add to cart
112-380 Clutch Plate - Norton fibre plate, 4mm thick. $36.00
add to cart
112-390 Clutch Plate - Norton special fibre plate, speedway style. $37.00
add to cart
112-400 Racing Conversion. Conversion of road AMC or Norton clutch to Manx specification. 3 plate type. $0.00
add to cart
112-420 Chainwheel Conversion. Modification of early type Norton clutch chainwheel from inserted friction segments to bonded fibre discs. Stops clutch drag and slip. Essential for good performance with old style clutch. (Chainwheel supplied by customer). $224.00
add to cart
112-450 Clutch Rubbers. Set of 6 to suit racing clutch. Small type. $29.00
add to cart
112-460 Clutch Rubbers, to suit early Manx and road type clutch. 3 large, 3 small. $29.00
add to cart
112-480 Clutch Rollers. 1/4" x 1/4" rollers to suit AMC or Norton clutch. State numbers required. $2.00
add to cart
112-490 Clutch Roller Cage to suit all Norton and AMC clutches. Precision CNC machined from solid bar. A huge improvement over the original pressed steel cages. $57.00
add to cart
112-500 Clutch Drum. Reproduction AMC or Norton type to suit all road models. Can be machined to suit Manx. $82.00
add to cart
112-505 Clutch Drum. Manx-AMC. To suit all Manx models, with 5/16" wide slots 6 x cover screws. $392.00
add to cart
112-505 Clutch Drum. Manx Laydown and Dolls-head. To suit all Manx models, with 3/8" wide slots 6 x cover screws. $392.00
add to cart
112-510 Clutch Spider. Reproduction to suit AMC road models. $125.00
add to cart
112-515 Clutch Spider. Reproduction to suit all Manx models. Made from chromemoly steel. Has a full diameter washer to tighten to the end of the gearbox spline. $398.00
add to cart
112-520 Clutch Drum Inner Plate, Manx. Hardened steel, with roller race. All Manx models $129.00
add to cart
112-525 Clutch Drum Outer Plate, Manx. Hardened steel. All Manx models, with 6 cover screws $71.00
add to cart

Motor Parts

113-050 Timing Cover -1938-1950 Gardengate and International Models. 2 screw type with rev counter gearbox boss. Cast in aluminium. $164.00
add to cart
113-051 Timing Cover - 1938-1950 Casting only. $85.00
add to cart
113-052 Timing Cover - 1932-1938 Casting only. $85.00
add to cart
113-075 $0.00
add to cart
113-120 Carrillo Con-rod 500cc Long-stroke Manx. $740.00
add to cart
113-130 Carrillo Con-rod 350cc Long-stroke Manx. $703.00
add to cart
113-140 Carrillo Con-rod 500cc International. $703.00
add to cart
113-250 Arias Piston 79mm 500cc long stroke 14:1 alcohol. Will fit International or ES2 models. Can be machined to give approximately 9:1 compression ratio. Supplied with rings and gudgeon pin. $425.00
add to cart
113-260 Arias Piston 80mm 500cc long stroke. 14:1 alcohol. Will fit International or ES2 models. Can be machined to give approximately 9:1 compression ratio. Supplied with rings and gudgeon pin. $425.00
add to cart
113-270 Piston Rings for Arias 79mm or 80mm Long-stroke piston. $69.00
add to cart
113-300 Woodruff Key to suit bevel and oil pump gear. 2 per set. $2.00
add to cart
113-310 Woodruff Key to suit long stroke drive sprocket. $7.00
add to cart
113-320 Woodruff Key to suit DOHC cambox central gear. $2.00
add to cart
113-340 Valve guide blank, bronze 5/16" ID $22.00
add to cart
113-341 Valve guide blank, bronze 11/32" ID $22.00
add to cart
113-342 Valve guide blank, bronze 3/8" ID $22.00
add to cart
113-343 Valve guide blank, cast iron 5/16" ID $14.00
add to cart
113-355 Valve lash cap 5/16"x .060"thick $12.00
add to cart
113-355 Valve lash cap 11/32" $0.00
add to cart
113-355 Valve lash cap 3/8" $0.00
add to cart
113-352 Valve, stainless blank 1.600" $0.00
add to cart
113-353 Valve, stainless blank 1.880" $0.00
add to cart
113-365 Valve keeper 5/16" $0.00
add to cart
113-366 Valve keeper 11/32" $0.00
add to cart
113-367 Valve keeper 3/8" $0.00
add to cart
113-370 Hairpin Valve Springs. International models. $196.00
add to cart
113-400 Oil Quill Spring to suit big end feed. $7.00
add to cart
113-410 Oil Quill Spring to suit cambox feeds. $7.00
add to cart
113-450 Oil Pump to suit all International and Manx models. Oversize bronze body. To be machined to suit your crank case. Made with correct splined shafts. $696.00
add to cart
113-455 Oil Pump Drive Dog. 1932-1963. All OHC models. $36.00
add to cart
113-470 Crankshaft Nut -Timing Side L/H threaded nut to suit all Manx and International models. $38.00
add to cart
113-500 Crankshaft Assembly. Complete assembly made from chrome-moly steel heat treated to 80 tons UTS. With integral mainshafts. Uses Carrillo con-rod and modern INA caged roller big- end. Supplied balanced, assembled and trued. This is the finest crankshaft available for a Manx. $3,576.00
add to cart
113-510 Crankshaft Balancing- all models. Using the same method as the factory. Each wheel is balanced individually, stopping torsional vibration. Essential if piston or con-rod weight is changed from standard. $310.00
add to cart
113-520 Crankshaft Boring. To rebore crankpin holes for repair of damaged holes. Essential if flywheels will not true up to factory specifications. $0.00
add to cart
113-530 Assemble Crankshaft. To assemble flywheels and true. We can undertake to recondition your old crankshaft. $0.00
add to cart
113-550 Big End Assembly 1936-1960 500cc & 1948-1960. Made from the best quality materials and using modern type silver plated caged needle bearing. Available with oversize shoulders to give correct press fit in old flywheels. State size of flywheel holes when ordering. Correct interference fit is 0.0025". $395.00
add to cart
113-570 Big End Assembly 1932-1957 500cc International model. State size of flywheel holes when ordering. $395.00
add to cart
113-575 Big End Assembly 1925-1930 500cc CS1, ES2 model. Replaces crowded roller type with INA type caged needle bearing. State size of flywheel holes when ordering. $395.00
add to cart
113-590 Crank-pin Nut hex type for all Long-stroke Manx models $74.00
add to cart
113-591 Crank-pin Nut hex type for all International models $74.00
add to cart
113-620 Rocker wear pad, SOHC $41.00
add to cart
113-625 Tappet adjuster, SOHC $72.00
add to cart
113-640 Cams SOHC to suit all International and Manx SOHC models. Latest type Manx grind. $222.00
add to cart
113-682 Magneto sprocket, top. Inter & Gardengate Manx $0.00
add to cart
113-683 Magneto sprocket, lower. Inter & Gardengate Manx $0.00
add to cart
113-684 Magneto sprocket, top. CS1 1927-30 $0.00
add to cart
113-685 Magneto sprocket, lower. CS1 1927-30 $0.00
add to cart
113-700 Fins, large cast with correct taper and finish, to repair damaged cylinders and heads. $35.00
add to cart
113-701 Fins, small cast with correct taper and finish, to repair damaged cylinders and heads. $21.00
add to cart
113-720 Sponge - for hairpin springs. Helps keep oil loss under control. $10.00
add to cart
113-750 Valve Seat Repair. Correct fitting and seat cutting. $0.00
add to cart
113-760 Exhaust Thread Repair. All models. $170.00
add to cart
113-770 Cylinder Liner Repair. All models. We are able to repair worn or damaged cylinders to standard specifications. $0.00
add to cart
113-800 Main Bearing. Timing side. Double row ball type. For long-strokes and early short-strokes without 6 screw flanged bearing $286.00
add to cart
113-804 Main Bearing, oversize. Timing side. Double row ball type, ground to size to suit your case. $366.00
add to cart
113-805 Main Bearing, oversize. Timing side. Double row ball type, ground to size to suit your case. $366.00
add to cart
113-810 Main Bearing. Drive side. Lipped roller type to suit outer bearing of all Long-stroke Manx and International models. $167.00
add to cart
113-820 Main Bearing. Drive side. Roller type to suit all Manx models. 2 per set on Short-stroke models. 1 per long stroke and International models. $124.00
add to cart
113-830 Main Bearing - Special. Drive side assembly with one piece outer sleeve, 2 x roller bearings and thrust washer. For all Long-stroke Manx $332.00
add to cart
113-840 Top Bevel Gear Pair 1957-58 Course, "hunting-tooth" bevel for Oldham-coupling type vertical shaft motors. Can be used in all pre 1957 motors with modifications $585.00
add to cart
113-841 Bottom Bevel Gear Pair 1957-58 Course, "hunting-tooth" bevel for Oldham-coupling type vertical shaft motors. Can be used in all pre 1957 motors with modifications $585.00
add to cart
113-880 Vertical Shaft Gland Nut 'O' Ring 1932-1958 for #113-891 or #113-892 modified gland nuts. To suit all International and long stroke Manx models. $3.00
add to cart
113-891 Vertical Shaft Gland Nut, Chrome, modified - 1932-1953. Special type, Chrome. With "O" ring seal. Also replaces perforated cup and locks ball bearing into housing. Original appearance. Recommended modification. Allows removal of cambox without undoing gland nuts. $72.00
add to cart
113-892 Vertical Shaft Gland Nut, Alloy, modified -1932-1953. Special type, Alloy. With "O" ring seal. Also replaces perforated cup, and locks ball bearing into housing. Original appearance. $88.00
add to cart
113-895 Gland nut copper washer replacement. Solid copper-plated washer replaces the original copper/asbestos washer to maintain original appearance. For use with modified gland nuts.  $11.00
add to cart
113-910 Cam drive Bearings. 1932-1953 Self-aligning ball bearings for all Oldham coupling vertical shaft motors. 2 per set. $223.00
add to cart
113-930 Dished Washer 1932-1957. Fits under lower self aligning bearing. Must be fitted to ensure no balls fall into bottom bevel gear. All Oldham coupling Manxes and Internationals. Can also be fitted under top bearing. $14.00
add to cart
113-940 Vertical Shaft Tube 1932-1953. Chrome. Original flanged type. To suit all International and long stroke Manx models. $52.00
add to cart
113-941 Vertical Shaft Tube, Modified 1932-1953. Plain type for use with #113-891 gland nuts. To suit all International and long stroke Manx models. $39.00
add to cart
113-950 Cambox Centre Shaft Ball Bearing, 1932-63 with groove for lock plate $56.00
add to cart
113-952 Cambox Centre Shaft Lipped Roller Bearing 1932-63 for magnesium cambox only. Can be uses in aluminium, cambox with an adaptor sleeve on outside diameter.  $158.00
add to cart
113-953 Cambox Centre Bearing Lock Plate, 1932-63. Improved type with smaller ID so plate can be punch-locked to stop bearing from rotating.  $31.00
add to cart
113-955 CS1 Cambox Mounting Plate 1928-30 $94.00
add to cart
113-956 CS1 Cambox Bearing Lock-plate 1928-30 $24.00
add to cart
113-958 CS1 Cambox Bevel Cover Casting, unmachined. 1928-30 $36.00
add to cart

Magnetos

114-010 Magneto Rewind. Rotating armature type. Rewound with latest type insulation, and vacuum impregnated with epoxy resin. Including new condenser. Greatly improves performance of magneto. $248.00
add to cart
114-040 Plug Cap, black.Non-suppressed. 90 degree for Long-stroke and road models. $7.00
add to cart
114-070 Pick- Up Screws for BTH $6.00
add to cart
114-090 Pick-Up Screws for Lucas $11.00
add to cart
114-100 Pick-Up - Lucas to suit all racing type rotating armature magnetos. $46.00
add to cart
114-110 Pick-Up - BTH to suit all TT magneto. $38.00
add to cart
114-130 Points - Lucas to suit rotating armature magnetos. $42.00
add to cart
114-140 Points - BTH to suit rotating armature TT magneto. $38.00
add to cart
114-160 Points Spring. Lucas or BTH rotating armature magnetos. $22.00
add to cart
114-205 Rubber Cap for HT cable. $3.00
add to cart
114-260 Screw - BTH Hex Head for points housing of KD1 & MD1. Drilled for lock wire. $7.00
add to cart
114-290 Points Cover. Screw-on type for Competition Magnetos: NR1, K2FC. $105.00
add to cart
114-300 Alloy End Cover. Special cast cover to suit SR1 Lucas magneto to improve appearance. Similar to original racing type ’SRR’ model end cover. Uses Lucas pick-up 114-10. $118.00
add to cart
114-305 Points Cover, Vintage Lucas. For CS1 Lucas racing magneto 1927-32 $55.00
add to cart
110-320 Magneto Base Stud. 3/8" stud for Gardengate models. $24.00
add to cart
110-330 Magneto Base Stud - Oversize to repair damaged magneto body 7/16" x 20tpi. $11.00
add to cart
110-340 Magneto Base Stud - Oversize to repair damaged magneto body 1/2" x 20tpi. $11.00
add to cart
110-350 Magneto Base Stud. Standard type for Featherbeds.3/8" diameter. Satin chrome. To suit Lucas or BTH magneto. $24.00
add to cart
110-360 Magneto Nuts 3/8" special small hex (.525") and longer than standard. $9.00
add to cart
110-362 Magneto base screw. 3/8" Whit. Countersunk, for OHV &SV models. $1.50
add to cart
110-370 Magneto Washers special thick washers essential for keeping magneto tight on slotted mounting holes. $12.00
add to cart
114-351 Magneto Shaft Nut 3/8" BSF nut for sprocket. $2.00
add to cart
114-355 Cam Ring for Lucas & BTH. Available for manual advance if required. $155.00
add to cart
114-360 Sparkplug. NGK B8EGV Gold palladium $24.00
add to cart
114-361 Sparkplug. NGK B9EGV Gold palladium $24.00
add to cart
114-362 Sparkplug. NGK B95EGV Gold palladium $24.00
add to cart
114-363 Sparkplug. NGK B10EGV Gold palladium $24.00
add to cart
114-364 Sparkplug. NGK B105EGV Gold palladium $24.00
add to cart
114-364 Sparkplug. NGK B11EGV Gold palladium $24.00
add to cart

Carburettors & Parts

114-500 Slide for 10 GP. State cutaway required. $112.00
add to cart
114-600 Needle - State type i.e. GP, GP6, 5GP, 5GP6, 3GP, 3GP6, TT, RN $22.00
add to cart
114-650 Needle Jet - State type & size i.e. GP,TT, RN. Sizes; 107,109,113,120,125. $21.50
add to cart
114-700 Main Jet - All sizes #100 -#1700 $11.00
add to cart
114-745 Blanking screw for air slide, GP, TT,RN. $16.00
add to cart
114-750 Cable Adjuster with lock nut.GP,RN,TT. Without slot for better cable location $21.00
add to cart
114-800 Fibre washers for jet holder or banjo union on early float chamber. $1.25
add to cart
114-810 Float needle for 302 type float bowl. $16.00
add to cart
114-850 Spring, Throttle, conical type. State carb type. $14.00
add to cart
114-900 Slide for T T . State cutaway required. $104.00
add to cart
114-905 Slide for R N. Use T T slide and fit needle bracket off old slide. $104.00
add to cart
114-910 Heat Insulating Spacer, 32mm. For all smaller carbs with 2" stud centres $11.00
add to cart
114-912 Heat Insulating Spacer, 28mm. For all smaller carbs with 2" stud centres $11.00
add to cart

Gearboxes & Parts

115-039 Gearbox Pinions to suit all early and late model 4 speed gearboxes. Available to suit road gearboxes. $392.00
add to cart
115-040 1st Gear, Daytona Ratio, to suit all models. Gives 2:1 1st gear ratio with a kick-starter. Original on an American market Garden-gate Manx. Ideal for all International models to avoid the big gap between 1st & 2nd.. $365.00
add to cart
115-041 1st gear, Daytona ratio, with no kick-starter. Converts standard Manx gearbox to give a lower 1st gear for clutch starts. $0.00
add to cart
115-050 Thrust Race Conversions for all Norton (pre-AMC) gearboxes. Replaces bronze thrust washer with needle thrust race assembly. Worthwhile improvement to early gearboxes. Includes instructions. Highly recommended. $45.00
add to cart
115-100 Bearing - Sleeve Gear. Large ball bearing to suit all Norton and AMC gearboxes. Rubber shielded. Ideal for early type gearboxes without sprocket seal. $77.00
add to cart
115-120 Bearing - Layshaft, inner. Ball bearing, all models. $14.00
add to cart
115-130 Bearing - Layshaft, inner. Lipped roller bearing to replace standard ball bearing. Much higher load rating than ball race. Highly recommended. $78.00
add to cart
115-140 Bearing - Layshaft, outer. Ball bearing to suit all Norton and AMC Manx gearboxes. $24.00
add to cart
115-150 Bearing - Layshaft, outer. Lipped roller bearing to suit all Norton and AMC Manx gearboxes. Much higher load rating than ball race. Highly recommended. $64.00
add to cart
115-160 Bearing - Mainshaft, outer, sealed. Ball bearing to suit all 'dolls-head' gearboxes. $36.00
add to cart
115-165 Bearing - Mainshaft, outer. Ball bearing to suit all Norton and AMC gearboxes. $24.00
add to cart
115-190 Shim- Sleeve gear. Between sleeve gear and bearing. Often required in pre- AMC gearboxes to get full engagement of top gear dogs. .032" thick. $6.00
add to cart
115-200 Shim- Mainshaft Outer Bearing. To set main shaft end float on all pre AMC gearboxes. $4.00
add to cart
115-240 Dome Nut to suit bottom 3 studs on Norton 'Laydown" type gearbox and also all end cover nuts on 'Doll's Head' gearboxes including road models. Satin chrome. $9.00
add to cart
115-241 Dome Nut to suit bottom 3 studs on Norton 'Laydown" type gearbox and also all end cover nuts on 'Doll's Head' gearboxes including road models. Black finish. $6.00
add to cart
115-251 Stud, G/box, dolls head gearbox 5/16" x 26 tpi $7.00
add to cart
115-300 Seal, Main Gearbox Bearing. For all AMC gearboxes. $8.00
add to cart
110-510 Magnet. 1/4" diameter x 1" long. Ideal for fitting to engine or gearbox drain plugs. $8.50
add to cart
110-530 Drain Plug. 1/4 BSP. Drilled for magnet & lock wire. Satin chrome. Suits all Single motors & Norton (pre-AMC) gearboxes. $12.00
add to cart
110-532 Drain Plug with magnet. 1/4 BSP. Drilled for magnet & lock wire. Satin chrome. Suits all Single motors & Norton (pre-AMC) gearboxes. $22.00
add to cart
110-540 Drain Plug. Larger 3/4" hex for better sealing. Drilled for magnet & lock wire. Satin chrome. $12.00
add to cart
110-542 Drain Plug with magnet. Larger 3/4" hex for better sealing. Drilled for magnet & lock wire. Satin chrome. $22.00
add to cart
110-545 Washer, copper, 1/4 BSP. For drain plug or oil fittings. $1.00
add to cart
115-340 Sleeve Gear Bush. All models. Sintered bronze. 2 per set. $21.00
add to cart
115-342 Bush, mainshaft 2nd gear. All models. $28.00
add to cart
115-343 Bush, layshaft 3rd gear. All models. $30.00
add to cart
115-345 Bush, camplate and quadrant AMC & Laydown $9.00
add to cart
115-346 Bush, camplate and quadrant Dolls head $9.00
add to cart
115-360 Spring, detent plunger, Norton Dolls head and laydown gearboxes. $5.50
add to cart
115-380 Spring, gear lever, Norton Dollshead $18.00
add to cart
115-390 Sleeve Gear Seal. All models. Non standard seal to stop mainshaft oil loss. Requires machining of sleeve gear. $18.00
add to cart
115-400 Layshaft, road type, without undercut at the end of spline $175.00
add to cart
115-410 Layshaft, Manx type $225.00
add to cart
115-800 End Cover - Norton CS1. 3 speed 1927-1929 Racing type Sturmey- Archer, with no kick-start. $288.00
add to cart
115-801 End Cover - Norton CS1. 3 speed. Casting only. $138.00
add to cart

Cycle Thread Nuts

120-000 Nut 1/4" x 26 tpi x .437" Standard Hex Std Height $3.00
add to cart
120-010 Nut 1/4" x 26 tpi x .312" Very Small Hex Std Height $1.60
add to cart
120-020 Nut 1/4" x 26 tpi x .312" Very Small Hex Tall Height $1.80
add to cart
120-030 Nut 1/4" x 26 tpi x .375" Small Hex Std Height $1.80
add to cart
120-050 Nut 1/4" x 26 tpi x .375" Small Hex Std Height $1.80
add to cart
120-060 Nut 1/4" x 26 tpi x .437" Nyloc nut Std Height $1.90
add to cart
120-100 Nut 5/16" x 26 tpi x .525" Standard Hex Std Height $3.50
add to cart
120-110 Nut 5/16" x 26 tpi x .525" Standard Hex Medium Height $3.00
add to cart
120-130 Nut 5/16" x 26 tpi x .437" Small Hex Medium Height $4.50
add to cart
120-140 Nut 5/16" x 26 tpi x .437" Small Hex Tall Height $5.00
add to cart
120-150 Nut 5/16" x 26 tpi x .437" Small Hex Std Height $3.50
add to cart
120-160 Nut 5/16" x BSF x .437" Small Hex Std Height $2.10
add to cart
120-200 Nut 3/8" x 26 tpi x .600" Standard Hex Std Height $2.00
add to cart
120-210 Nut 3/8" x 26 tpi x .600" Standard Hex Half Nut $2.50
add to cart
120-215 Nut 3/8" x 26 tpi x .525" Small Hex Std Height $2.00
add to cart
120-220 Nut 3/8" x BSF x .600" Standard Hex Std Height $4.00
add to cart
120-230 Nut 3/8" x 26 tpi x .525" Small Hex Tall Height $3.00
add to cart
120-240 Nut 3/8" x 26 tpi x .600" Standard Hex Tall Height $3.00
add to cart
120-250 Nut 3/8" x 26 tpi x .525" Small Hex Half Nut $3.00
add to cart
120-300 Nut 7/16" x 26 tpi x .687" Standard Hex Std Height $4.50
add to cart
120-320 Nut 7/16" x 20 tpi x .687" Standard Hex Half Nut $2.20
add to cart
120-330 Nut 7/16" x 20 tpi x .600" Small Hex Tall Height $4.00
add to cart
120-333 Nut 7/16" x 20 tpi x .600" Small Hex Tall, radius end. $4.00
add to cart
120-350 Nut 7/16" x 20 tpi x .687" Standard Hex Std Height $4.50
add to cart
120-370 Nut 7/16" x 26 tpi x .687" Standard Hex Half Nut $2.20
add to cart
120-400 Nut 1/2" x 26 tpi x .750" Standard Hex Std Height $4.75
add to cart
120-420 Nut 1/2" x 20 tpi x .750" Standard Hex Half Nut $3.30
add to cart
120-450 Nut 1/2" x 20 tpi x .750" Standard Hex Std Height $4.75
add to cart
120-470 Nut 1/2" x 26 tpi x .750" Standard Hex Half Nut $3.30
add to cart
120-550 Nut 11/16" x 20 tpi x 1" Standard Hex Std Height $5.00
add to cart

Small Outside Diameter Washers

121-100 Washer 1/4" x 1/2" x 16 gauge, small outside diameter x 200  $6.00
add to cart
121-050

Washer 5/16" x 1/2" x 16 gauge,(.064") very small outside diameter x 200

$18.00
add to cart
121-200 Washer 5/16" x 5/8" x 16 gauge x 200  $7.00
add to cart
121-210 Washer 5/16" x 3/4" x 16 gauge x 200  $7.00
add to cart
121-300 Washer 3/8" x 3/4" x 16 gauge, small outside diameter x 200  $8.00
add to cart
121-040 Washer 3/8" x 3/4" x 2mm (0.080") extra thick $12.00
add to cart

Screws 1/4"BSF (26 tpi). Flat Top Cheesehead.

122-000 Screw 1/4" x BSF x 11/16" Flat Cheese head Screw. $3.00
add to cart
122-010 Screw 1/4" x BSF x 13/16" Flat Cheese head Screw. $3.00
add to cart
122-020 Screw 1/4" x BSF x 7/8" Flat Cheese head Screw. $3.00
add to cart
122-030 Screw 1/4" x BSF x 1" Flat Cheese head Screw. $3.00
add to cart
122-040 Screw 1/4" x BSF x 1-1/8" Flat Cheese head Screw. $3.00
add to cart
122-050 Screw 1/4" x BSF x1- 5/8" Flat Cheese head Screw. $3.00
add to cart

Bolts 1/4" BSF Thread (26 TPI)

126-000 Bolt 1/4" x 1/2" Fully threaded $2.50
add to cart
126-010 Bolt 1/4" x 5/8" Fully threaded $2.50
add to cart
126-020 Bolt 1/4" x 3/4" Fully threaded $2.50
add to cart
126-030 Bolt 1/4" x 3/4" Partly threaded $2.50
add to cart
126-040 Bolt 1/4" x 7/8" Fully threaded $2.50
add to cart
126-050 Bolt 1/4" x 7/8" Partly threaded $2.50
add to cart
120-060 Bolt 1/4" x 1" Fully threaded $2.75
add to cart
126-070 Bolt 1/4" x 1" Partly threaded $2.75
add to cart
126-080 Bolt 1/4" x 1-1/8" Fully threaded $2.75
add to cart
126-090 Bolt 1/4" x 1-1/8" Partly threaded $2.75
add to cart
126-100 Bolt 1/4" x 1-1/4" Fully threaded $2.80
add to cart
126-110 Bolt 1/4" x 1-1/4" Partly threaded $2.80
add to cart

© 2005 copyright McIntosh Racing
website design : www.somethingwild.co.nz
609